|
Micro
Mill shown with optional Vise
Computer Ready (CR) Micro Mill
(way-covers included but not shown)
SPECIFICATIONS
GENERAL:
- Height 21-3/8 in (manual) 26-3/8 in (CNC)
- Width 17 in (manual) 22 in (CNC)
- Depth 16-3/4 in (manual) 21 in (CNC)
- Weight 65 lbs (manual) 85 lbs (CNC)
- Maximum bearing runout 0.0004 in.
- X axis dovetails 45 deg.
- Y axis dovetails 90 deg.
- Z axis steel box ways
- 1/2"-20 leadscrews on X,Y,& Z
- All lead screw drives have friction adjustable
micrometer dials in .001 inch increments
- Pulley type std. 5/8 in. bore multi-step vee belt.
- Construction - Steel, hard anodized aluminum on all
moving components, adjustable brass gibs, and precision
ground steel ways hand lapped for long life and
accuracy.
CAPACITY:
- Travel in X axis 9.5 in. (Model 2018)
- Travel in X axis 12 in. (Model 2019)
- Travel in Y axis 5.5 in
- Travel in Z axis 6.0 in
- Table dimensions 3 1/2 x 15 1/2 inches (Model 2018)
- Table dimensions 3 1/2 x 18.4 inches (Model 2019)
- Maximum Z-distance to table 9.0 in
- Z-Axis swivel 90 degrees
- 6 spindle speeds 525-5200 RPM
- 6 spindle speeds 1000-10000 RPM (CR mill)
- Z axis column rotation up to 180 degrees
- Spindle head rotation 90 degrees
SPINDLE (ER16 SPINDLE):
-
Spindle Run out less than .0003
-
Max spindle speed 10000 RPM
-
Sealed precision ball bearing
-
Bearing OD 1.5748 in., ID 0.6692 in.
- Spindle hole 0.406 in.
- Spindle ID taper 8 deg (16 deg included)
- Max. collet diameter 3/8 in.
- Pulley size 5/8 in. bore.
- Ball Bearings in all lead screw bearing blocks
|
