|
CNC Machine Page
Let Brianna
Products serve all of your CNC needs!
Best online prices with the
service to back it up!
Taig Mills and Lathes
Why buy from Dealer with
No Pool Cue knowledge?
There are plenty of online
dealers selling Taig and Sherline machines, but how many of them
have years of hands-on pool cue experience? How many of them will be
able answer your questions, help you write or even write your CNC
programs for you?
Besides hands-on pool cue
experience we also have a full service machine shop to help retro
fit anything that you might need. We build many fixtures at this
time for the cue maker and can help you along in any phase of your
cue making operation.
Why spend unneeded money and
waste many precious hours when we can help you through your cue
making obstacles? We encourage you to call first before you order.
We don't want you ordering something you may have questions about. I
am always here to help you.
Lee Malakoff
Although we try to
make all of our products as easy to use as possible, there is a
learning curve. Especially if you have never had experience with the
type of product you are buying. We do offer Tech Support at an
additional cost through Jerry Powers of Jerico Custom Cues. We
encourage anyone with little or no experience to purchase tech
support.
Brianna Products
makes no revenue on Tech Support purchased.
|
 |
The Brianna Breeze Is HERE!
Click on the photo for all the information!
Affordable CNC Machine!
Only
$2995.00!
With Brianna
Products It's A Breeze! |
|
Cue Maker's
Fixture and 4th Axis for TAIG Mill
40" fixture for inlaying pool cues on a TAIG
Mill. (Mill NOT included) It comes with a CNC ready 4th axis from Sherline with stepper
motor and adjustable tail stock. The fixture is also adjustable on
the table of the mill. The TAIG has a 12" X travel. This fixture
allows you to move the cue to allow inlay access at any point on the
cue. You can even turn the cue backwards if you need to! The tail
stock has a full adjustment from the end of the fixture up to the
chuck. The T slot runs the length of the 40" plate. There are
matched sets of adjustment holes to move the fixture to any possible
cue position on the bed of the TAIG. (Does NOT
include CNC Control Box)
HERE'S WHAT YOU GET!
40" Precision CNC Machined Fixture by Brianna
Products, a $200.00 value.
Sherline 4th Axis with Stepper Motor, a $395.00 value.
Sherline Mounting Bracket for 4th Axis, a $75.00 value.
Sherline Tailstock, a $75.00 value.
TAIG Chuck,
a $64.00 value.
Brianna Products Parts Table to Hold or Clamp Parts, a $125.00
value.
Total value of everything - When Bought Separately $859.00
Get it ALL for one LOW Brianna PRODUCTS price of $800.00
THAT'S A SAVINGS OF
$59.00
Shipping CONUS - Flat Rate of $35.00
No gimmicks ... Just quality and
service!
|
| 40" Brianna CNC
Fixture Alone, or w/ Tail Stock
Keywayed to move up & down the length.
Drilled and tapped to accept Shurline 4th access (NOT
INCLUDED) 8 counter sunk holes to allow you to fasten it to
a bed.
CNC Fixture Alone - $200.00
With Tail Stock - $425.00
|
|
| Close-Up of End of
Brianna CNC Fixture
Click the photo below to see the
entire fixture!
 |
Tail Stock Fits Taig
Dove Tail or Brianna CNC Fixture
Tail Stock $225.00
|
| Mounting Bracket for Nema 34
motor Compatible with 80/20 Alum. or on your own CNC
$15.00
|
 |
| Mounting Bracket
for a Nema 23 Motor. Compatible with 80/20 Alum.
Can be used with 15-30 or 15-45
$12.00
|
 |
| Sherline 4th Access Mount
Compare to $75.00 Through Sherline
Our Price $40.00
|
 |
|
The 'Whole Ball of Wax'
Deal! CNC Ready 4" Rotary
Table - $320.00 (DOES NOT
INCLUDE STEPPER MOTOR) Right
Angle Attachment - $75.00 Tail
Stock - $225.00 3" Self Centering
Jaw Chuck - $64.00 40" Brianna
CNC Fixture - $200.00 Total
Individually - $884.00
Brianna Products Blowout
Deal - $850.00
That's a savings of $34.00 + We will
add a FREE GIFT for you! You
will receive a Recut Driver Fixture with 3 Delrin Collets!
A $75.00 VALUE!
|
Right
Angle Attachment Only - $75.00
|
|
CNC Ready 4" Rotary
Table Only - $320.00
|
3" Self Centering
Jaw Chuck Only - $64.00
|
To
visit our Kress page click here
Brianna
Products is a Proud Dealer of Sherline Products!
Made in the U.S.A.
Manufacturing desktop milling machines and lathes for
over 30 years
|
 |
